Debug Platform Cfm - Cisco ME 3400 Command Reference Manual

Appendix B Cisco ME 3400 Ethernet Access Switch Debug Commands

debug platform cfm

Use the debug platform cfm privileged EXEC command to enable debugging of the Ethernet
Connectivity Fault Management (CFM) service. Use the no form of this command to disable debugging.
This command is supported only when the switch is running the metro IP access or metro access image.
Syntax Description This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)SEG
Usage Guidelines CFM is an end-to-end, per-service-instance, Ethernet layer operation, administration, and management
(OAM) protocol. It provides connectivity monitoring, fault verification, and fault isolation for large
Ethernet networks.
The undebug platform cfm command is the same as the no debug platform cfm command.
Related Commands Command
show debugging
OL-9640-10
debug platform cfm
no debug platform cfm
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Cisco ME 3400 Ethernet Access Switch Command Reference
debug platform cfm
B-39