Debug Platform Dot1X - Cisco ME 3400 Command Reference Manual

debug platform dot1x

debug platform dot1x
Use the debug platform dot1x privileged EXEC command to enable debugging of IEEE 802.1x events.
Use the no form of this command to disable debugging.
Syntax Description
initialization
interface-configuration
rpc
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(25)EX
Usage Guidelines The undebug platform dot1x command is the same as the no debug platform dot1x command.
Related Commands Command
show debugging
Cisco ME 3400 Ethernet Access Switch Command Reference
B-42
debug platform dot1x {initialization | interface-configuration | rpc}
no debug platform dot1x {initialization | interface-configuration | rpc}
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Appendix B Cisco ME 3400 Ethernet Access Switch Debug Commands
Display IEEE 802.1x initialization sequence debug messages.
Display IEEE 802.1x interface configuration-related debug messages.
Display IEEE 802.1x remote procedure call (RPC) request debug
messages.
OL-9640-10