Show Vlan - Cisco ME 3400 Command Reference Manual

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

show vlan

Use the show vlan user EXEC command to display the parameters for all configured VLANs or one
VLAN (if the VLAN ID or name is specified) on the switch.
Syntax Description access-map
brief
dot1q tag native
filter
id vlan-id
internal usage
mtu
name vlan-name
private-vlan [type]
remote-span
summary
uni-vlan [type]
| begin
| exclude
| include
expression
Though visible in the command-line help string, the ifindex keyword is not supported.
Note
OL-9640-10
show vlan [access-map | brief | dot1q tag native | filter | id vlan-id | internal usage | mtu | name
vlan-name | private-vlan [type] | remote-span | summary | uni-vlan [type]] [ | {begin |
exclude | include} expression]
See the
(Optional) Display one line for each VLAN with the VLAN name, status,
and its ports.
(Optional) Display the IEEE 802.1Q native VLAN tagging status. This
keyword is supported only when the switch is running the metro IP access or
metro access image.
See the
(Optional) Display information about a single VLAN identified by VLAN ID
number. For vlan-id, the range is 1 to 4094.
(Optional) Display a list of VLANs being used internally by the switch.
These VLANs are always from the extended range (VLAN IDs 1006 to
4094). You cannot create VLANs with these IDS by using the vlan global
configuration command until you remove them from internal use. This
keyword is supported only when the switch is running the metro IP access
image.
(Optional) Display a list of VLANs and the minimum and maximum
transmission unit (MTU) sizes configured on ports in the VLAN.
(Optional) Display information about a single VLAN identified by VLAN
name. The VLAN name is an ASCII string from 1 to 32 characters.
(Optional) Display information about configured private VLANs, including
primary and secondary VLAN IDs, type (community, isolated, or primary)
and ports belonging to the private VLAN. Enter type (optional) to see only
the VLAN ID and the type of private VLAN.
(Optional) Display information about Remote SPAN (RSPAN) VLANs.
(Optional) Display VLAN summary information.
(Optional) Display user network interface-enhanced network interface
(UNI-ENI) VLAN information. Enter type (optional) to see only the VLAN
ID and type of UNI-ENI VLAN.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
show vlan access-map command.
show vlan filter command.
Cisco ME 3400 Ethernet Access Switch Command Reference
show vlan
2-585