Ethernet Uni - Cisco ME 3400 Command Reference Manual

ethernet uni

ethernet uni
Use the ethernet uni interface configuration command to set UNI bundling attributes. Use the no form
of this command to return to the default bundling configuration.
This command is available only if your switch is running the metro IP access or metro access image.
Syntax Description bundle
all-to-one
multiplex
Defaults If bundling or multiplexing attributes are not configured, the default is bundling with multiplexing. The
UNI then has one or more EVCs with one or more CE VLANs mapped to each EVC.
Command Modes Interface configuration
Command History Release
12.2(25)SEG
Usage Guidelines The UNI attributes determine the functionality that the interface has regarding bundling VLANs,
multiplexing EVCs, and the combination of these.
If you want both bundling and multiplexing services for a UNI, you do not need to configure bundling
or multiplexing. If you want only bundling, or only multiplexing, you need to configure it appropriately.
When you configure, change, or remove a UNI service type, the EVC and CE-VLAN ID configurations
are checked to ensure that the configurations and the UNI service types match. If the configurations do
not match, the command is rejected.
If you intend to use the ethernet lmi ce-vlan map any service configuration command, you must first
configure all-to-one bundling on the interface. See the
information.
Examples This example shows how to configure bundling without multiplexing:
Switch(config-if)# ethernet uni bundle
Cisco ME 3400 Ethernet Access Switch Command Reference
2-120
ethernet uni {bundle [all-to-one] | multiplex}
no ethernet uni {bundle | multiplex}
Configure the UNI to support bundling without multiplexing. This service
supports only one Ethernet virtual connection (EVC) at the UNI with one or
multiple customer edge (CE)-VLAN IDs mapped to the EVC.
(Optional) Configure the UNI to support bundling with a single EVC at the
UNI and all CE VLANs mapped to that EVC.
Configure the UNI to support multiplexing without bundling. The UNI can
have one or more EVCs with a single CE-VLAN ID mapped to each EVC.
Modification
This command was introduced.
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
ethernet lmi ce-vlan map section for more
OL-9640-10