Chapter 2
Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
This example shows how to configure the option-82 circuit-ID override suboption:
Switch(config-if)# ip dhcp snooping vlan 250 information option format-type circuit-id
override string testcustomer
You can verify your settings by entering the show ip dhcp snooping user EXEC command.
The show ip dhcp snooping user EXEC command only displays the global command output, including
Note
a remote-ID configuration. It does not display any per-interface, per-VLAN string that you have
configured for the circuit ID.
Related Commands
Command
ip dhcp snooping information
option format remote-id
show ip dhcp snooping
OL-9640-10
ip dhcp snooping vlan information option format-type circuit-id string
Description
Configures the option-82 remote-ID suboption.
Displays the DHCP snooping configuration.
Cisco ME 3400 Ethernet Access Switch Command Reference
2-167