Show Ipc - Cisco ME 3400 Command Reference Manual

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands

show ipc

Use the show ipc user EXEC command to display Interprocess Communications Protocol (IPC)
configuration, status, and statistics.
This command is available only if your switch is running the metro IP access image.
Syntax Description
mcast {appclass |
groups | status}
nodes
ports [open]
queue
rpc
session {all | rx | tx} Display the IPC session statistics (available only in privileged EXEC mode).
verbose
status [cumlulative] Display the status of the local IPC server. The keyword has this meaning:
zones
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(25)EX
OL-9640-10
show ipc {mcast {appclass | groups | status} | nodes | ports [open] | queue | rpc | session {all |
rx | tx} [verbose] | status [cumlulative] | zones} [ | {begin | exclude | include} expression]
Display the IPC multicast routing information. The keywords have these
meanings:
appclass—Display the IPC multicast application classes.
•
• groups—Display the IPC multicast groups.
• status—Display the IPC multicast routing status.
Display participating nodes.
Display local IPC ports. The keyword has this meaning:
open—(Optional) Display only the open ports.
•
Display the contents of the IPC transmission queue.
Display the IPC remote-procedure statistics.
The keywords have these meanings:
all—Display all the session statistics.
•
• rx—Display the sessions statistics for traffic that the switch receives
• tx—Display the sessions statistics for traffic that the switch forwards.
(Optional) Display detailed statistics (available only in privileged EXEC
mode).
cumlulative—(Optional) Display the status of the local IPC server since
•
the switch was started or restarted.
Display participating IPC zones. The switch supports one IPC zone.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Cisco ME 3400 Ethernet Access Switch Command Reference
show ipc
2-489