Show Platform Monitor - Cisco ME 3400 Command Reference Manual

Appendix C Cisco ME 3400 Ethernet Access Switch Show Platform Commands

show platform monitor

Use the show platform monitor privileged EXEC command to display platform-dependent Switched
Port Analyzer (SPAN) information.
Syntax Description session
session-number
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(25)EX
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
OL-9640-10
show platform monitor [session session-number] [ | {begin | exclude | include} expression]
(Optional) Display SPAN information for the specified SPAN session. The
range is 1 to 66.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Cisco ME 3400 Ethernet Access Switch Command Reference
show platform monitor
C-23