Debug Platform Cfm - Cisco Catalyst 3750 Metro Command Reference Manual

debug platform cfm

debug platform cfm
Use the debug platform cfm privileged EXEC command to enable debugging of the Ethernet
Connectivity Fault Management (CFM) service. Use the no form of this command to disable debugging.
Syntax Description
This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(25)SEG
Usage Guidelines CFM is an end-to-end per-service-instance Ethernet layer operation, administration, and management
(OAM) protocol that provides connectivity monitoring, fault verification, and fault isolation for large
Ethernet networks.
The undebug platform cfm command is the same as the no debug platform cfm command.
Related Commands Command
show debugging
Catalyst 3750 Metro Switch Command Reference
B-44
debug platform cfm
no debug platform cfm
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Appendix B Catalyst 3750 Metro Switch Debug Commands
OL-9645-10