Appendix B
Cisco ME 3400 Ethernet Access Switch Debug Commands
debug platform etherchannel
Use the debug platform etherchannel privileged EXEC command to enable debugging of
platform-dependent EtherChannel events. Use the no form of this command to disable debugging.
Syntax Description
init
link-up
rpc-detailed
rpc-generic
warnings
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.2(25)EX
Usage Guidelines
The undebug platform etherchannel command is the same as the no debug platform etherchannel
command.
Related Commands
Command
show debugging
OL-9640-10
debug platform etherchannel {init | link-up | rpc-detailed | rpc-generic | warnings}
no debug platform etherchannel {init | link-up | rpc-detailed | rpc-generic | warnings}
Display EtherChannel module initialization debug messages.
Display EtherChannel link-up and link-down related debug messages.
Display detailed EtherChannel remote procedure call (RPC) debug messages.
Display EtherChannel RPC generic debug messages.
Display EtherChannel warning debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Cisco ME 3400 Ethernet Access Switch Command Reference
debug platform etherchannel
B-43