Cisco ME 3400 Command Reference Manual page 226

ip sticky-arp (global configuration)
•
•
Examples
To disable sticky ARP:
Switch(config)# no ip sticky-arp
You can verify your settings by using the show arp privileged EXEC command.
Related Commands Command
arp
show arp
Cisco ME 3400 Ethernet Access Switch Command Reference
2-198
Use the no sticky-arp global configuration command to disable sticky ARP on the switch.
Use the no sticky-arp interface configuration command to disable sticky ARP on an interface when
sticky ARP is disabled on the switch.
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
Description
Adds a permanent entry in the ARP table. For syntax information,
see the Cisco IOS IP Addressing Services Command Reference,
Release 12.4 > ARP Commands.
Displays the entries in the ARP table. For syntax information, see the
Cisco IOS IP Addressing Services Command Reference,
Release 12.4 > ARP Commands.
OL-9640-10