Cisco ME 3400 Command Reference Manual page 277

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
Examples This example shows how to create a MAC named extended access list named mac1 and to enter extended
MAC access-list configuration mode:
Switch(config)# mac access-list extended mac1
Switch(config-ext-macl)#
This example shows how to delete MAC named extended access list mac1:
Switch(config)# no mac access-list extended mac1
You can verify your settings by entering the show access-lists privileged EXEC command.
Related Commands Command
deny (MAC access-list
configuration)
permit (MAC access-list
configuration)
show access-lists
vlan access-map
OL-9640-10
Description
Configures the MAC ACL (in extended MAC-access list configuration
mode).
Displays the access lists configured on the switch.
Defines a VLAN map and enters access-map configuration mode where
you can specify a MAC ACL to match and the action to be taken.
Cisco ME 3400 Ethernet Access Switch Command Reference
mac access-list extended
2-249