Cisco ME 3400 Command Reference Manual page 443

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
Command
cpu traffic qos dscp
cpu traffic qos
precedence
cpu traffic qos
qos-group
policy-map
show policy-map
show running-config
show table-map
table-map
OL-9640-10
Description
Configures quality of service (QoS) marking based on DSCP for control
plane traffic.
Configure quality of service (QoS) marking based on precedence for
control plane traffic.
Maps all CPU-generated traffic to a single class in the output policy-maps
without changing the class of service (CoS), IP differentiated services
code point (DSCP), or IP-precedence packet markings.
Configures a policy map that can be attached to multiple physical ports and
enters policy-map configuration mode.
Displays QoS policy map information for the specified policy map name,
interface, input or output policy maps, or policy-map class.
Displays the configured class maps, policy maps, table maps, and
aggregate policers.
Displays information for all configured table maps or the specified table
map.
Configures quality of service (QoS) mapping and enters table-map
configuration mode.
Cisco ME 3400 Ethernet Access Switch Command Reference
show cpu traffic qos
2-415