Show Table-Map - Cisco ME 3400 Command Reference Manual

show table-map

show table-map
Use the show table-map user EXEC command to display quality of service (QoS) table-map
information about all configured table maps or the specified table map.
Syntax Description table-map-name
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History Release
12.2(25)EX
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is an example of output from the show table-map command:
Switch> show table-map
tandoori_1>show table-map
Table Map abc
Table Map cos2dscp
Table Map cos2cos
Table Map cos2cos10
Table Map cos=cos
Cisco ME 3400 Ethernet Access Switch Command Reference
2-578
show table-map [table-map-name] [ | {begin | exclude | include} expression]
(Optional) The name of the table map.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
default copy
from 2 to 16
default copy
from 2 to 5
from 3 to 6
default 7
default copy
default copy
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
OL-9640-10