Cisco ME 3400 Command Reference Manual page 302

match ip dscp
Examples This example shows how to create a class map called inclass, which matches all the incoming traffic with
DSCP values of 10, 11, and 12:
Switch(config)# class-map match-any in-class
Switch(config-cmap)# match ip dscp 10 11 12
Switch(config-cmap)# exit
You can verify your settings by entering the show class-map privileged EXEC command.
Related Commands Command
class-map
show class-map
Cisco ME 3400 Ethernet Access Switch Command Reference
2-274
Chapter 2
Description
Creates a class map to be used for matching packets to the class whose name
you specify.
Displays quality of service (QoS) class maps.
Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
OL-9640-10