Show Platform Qos - Cisco ME 3400 Command Reference Manual

Appendix C Cisco ME 3400 Ethernet Access Switch Show Platform Commands

show platform qos

Use the show platform qos privileged EXEC command to display platform-dependent quality of service
(QoS) information.
Syntax Description
debug
aggregate-policer
aggregate-policer-name
global-config
input-queue
interface [interface-id] [buffers |
policers | queuing]
label-table [dynamic-label {dscp
value cos value | label-number value
| policy-map policy-map-name
class-map class-map-name} [asic
number]
OL-9640-10
show platform qos debug [aggregate-policer aggregate-policer-name | global-config |
input-queue | [interface [interface-id] [buffers | policers | queuing]] | label-table
[dynamic-label {dscp value cos value | label-number value | policy-map policy-map-name
class-map class-map-name} [asic number] | policer {parameter-table | qos-table|
selection-table} [asic number] | policy-map policy-map-name [asic number] | port-class [asic
number] | port-config port-number [asic number] | port-info port-number [asic number] |
table-map | vlan vlan-id] [ | {begin | exclude | include} expression]
show platform qos statistics [interface [interface-id]] [ | {begin | exclude | include} expression]
Display QoS debug messages for the switch or for the
specified keyword.
(Optional) Display QoS aggregate policer information for the
specified aggregate policer.
(Optional) Display QoS global configuration information.
(Optional) Display QoS input queue information.
(Optional) Display QoS information for all interfaces or the
specified interface. The keywords have these meanings:
buffers—(Optional) Display information about QoS
•
buffers.
• policers—(Optional) Display information about QoS
policers.
• queuing—(Optional) Display information about QoS
output queues.
(Optional) Display Qos label table information. The keywords
have these meanings:
dynamic-label—(Optional) Display dynamic label
•
information.
dscp value cos value—Display information based on
•
Differentiated Services Code Point (DSCP) value (0 to 63)
and class of service (CoS) value (0 to 7).
label-number value—Display information based on the
•
dynamic label number. The range is from 158 to 255.
policy-map policy-map-name class-map
•
class-map-name—Display information for the specified
policy map and class map.
asic number—(Optional) Display information based on
•
the port ASIC number. The number is always 0.
Cisco ME 3400 Ethernet Access Switch Command Reference
show platform qos
C-35