Cisco ME 3400 Command Reference Manual page 531

Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
This is an example of output from the show lacp sys-id command:
Switch> show lacp sys-id
32765,0002.4b29.3a00
The system identification is made up of the system priority and the system MAC address. The first two
bytes are the system priority, and the last six bytes are the globally administered individual MAC address
associated to the system.
Related Commands Command
clear lacp
lacp port-priority
lacp system-priority
OL-9640-10
Description
Clears the LACP channel-group information.
Configures the LACP port priority.
Configures the LACP system priority.
Cisco ME 3400 Ethernet Access Switch Command Reference
show lacp
2-503