Show Virtual-Chassis Protocol Route; Table 14: Show Virtual-Chassis Protocol Route Output Fields - Juniper EX9200 Features Manual

Virtual Chassis Feature Guide for EX9200 Switches

show virtual-chassis protocol route

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 14: show virtual-chassis protocol route Output Fields

Field Name Field Description
Dev MAC address of the member storing the VCCP routing table.
138
show virtual-chassis protocol route
<all-members>
<destination-id>
<local>
<member member-id>
Command introduced in Junos OS Release 10.4 for EX Series switches.
Command introduced in Junos OS Release 13.2X50-D15 for the QFX Series.
Command introduced in Junos OS Release 13.2X51-D20 for Virtual Chassis Fabric (VCF).
Display the unicast and multicast Virtual Chassis Control Protocol (VCCP) routing tables
within the Virtual Chassis or VCF.
—Display the unicast and multicast routing tables for all members of the Virtual
none
Chassis.
all-members —(Optional) Display the unicast and multicast routing tables for all members
of the Virtual Chassis or VCF.
—(Optional) Display the unicast and multicast routing tables to the specified
destination-id
destination member ID for each member of the Virtual Chassis or VCF.
—(Optional) Display the unicast and multicast routing tables on the device where
local
this command is entered.
member member-id —(Optional) Display the unicast and multicast routing tables for the
specified member of the Virtual Chassis or VCF.
clear
EX Series Virtual Chassis Overview
Understanding QFX Series Virtual Chassis
Understanding the Virtual Chassis Control Protocol in an EX8200 Virtual Chassis
show virtual-chassis protocol route on page 139
Table 14 on page 138 lists the output fields for the
command. Output fields are listed in the approximate order in which they appear.
show virtual-chassis protocol route
Copyright © 2017, Juniper Networks, Inc.