Navigating The Quick Configuration Pages; Navigating The J-Web Configuration Editor - Juniper J-series Services Router J2320 Getting Started Manual

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide
from all pages, allowing you to skip from one task or subtask to the other from any
page in the interface.
The path displayed in the top right corner of each page provides a context. Use this
path to see your location in a configuration hierarchy. Clicking any link in the path
displays the corresponding page.
You can easily navigate to most subtasks by selecting them from the side pane. On
pages where you are required to take an action, buttons and links allow you to move
to the next or previous page as you perform certain actions. Most buttons and links
are self-explanatory. But some buttons have different functions on the Quick
Configuration and Edit Configuration (J-Web configuration editor) pages. For more
information, see "Navigating the Quick Configuration Pages" on page 86 and
"Navigating the J-Web Configuration Editor" on page 86.

Navigating the Quick Configuration Pages

Table 42 on page 86 describes the functions of key Quick Configuration buttons.
Table 42: J-Web Quick Configuration Buttons

Navigating the J-Web Configuration Editor

When you select Edit Configuration (J-Web configuration editor), the side pane
displays the top level of the configured hierarchy committed on the Services Router.
The main pane displays the configuration hierarchy options.
As you navigate through the configuration, the hierarchy level is displayed at the top
of the main pane. You can click a statement or identifier displayed in the main pane,
or in the hierarchy in the left pane, to display the corresponding configuration options
in the main pane.
After typing or selecting your configuration edits, click a button in the main pane
(described in Table 43 on page 87) to move to the previous page after applying,
committing, or canceling the configuration. An updated configuration does not take
effect until you commit it.
86
Using the J-Web Interface
Function
Commit your entries into the configuration, and return to the previous J-Web
page.
Clear the entries you have not yet applied to the configuration, and return to the
previous J-Web page.
Commit your entries into the configuration, and stay on the same J-Web page.
Button
OK
Cancel
Apply