Data Port Interface Protocol; Introduction; Configuring The Data Port - Nellcor OXIMAX N-595 Service Manual

D a t a P o r t I n t e r f a c e P r o t o c o l

Introduction

Configuring the
Data Port
N-595
When connected to the data port on the back of the N-595, printouts can be
obtained or patient data can be communicated to a Nellcor Oxinet II
monitoring system, Nellcor Intouch Remote Oximetry Notification System or
personal computer (PC). Analog signals representing %SpO
pulse amplitude are also provided by the data port. A nurse call function is
also available from the data port. Each of these is discussed in more detail in
the paragraphs that follow.
The N-595 provides a bedside monitor interface for interfacing the
N-595 with Agilent (HP), SpaceLabs, Marquette, and Datex monitors.
Items pertaining to the data port can be adjusted by following the softkey map
in Figure 19 on page 90. For a complete description of the softkeys, see the
N-595 operator's manual.
, pulse rate, and
2
89