Data Port Interface Protocol
Language
Selection
92
•
SPACELBS interfaces the N-595 with a SpaceLabs monitor
•
MARQ interfaces the N-595 with a GE Marquette monitor
•
DATEX interfaces the N-595 with a Datex-Ohmeda AS/3 monitor
Note:
Selecting AGILEN, SPACELBS, MARQ, or DATEX automatically
sets the baud rate to the rate applicable for that protocol.
To change the communication protocol:
1. Turn on the N-595 by pressing the POWER ON/OFF button.
2. Press the SETUP softkey.
3. Press the NEXT softkey.
4. Press the NEXT softkey.
5. Press the COMM softkey.
6. Press the SELECT softkey.
7. Use the ADJUST UP and ADJUST DOWN buttons to select the desired
protocol.
8. Press the EXIT softkey to save the protocol setting.
Eight languages can be viewed on the screen and sent to the printer. The
languages are ENGLISH, FRANCAIS (French), DEUTSCH (German),
ITALIANO (Italian), ESPANOL (Spanish), NEDERLANDS (Dutch), PORT
(Portuguese), and SVERIGE (Swedish).
1. Turn on the N-595 by pressing the POWER ON/OFF button.