Figure 1: N-595 Front Panel - Nellcor OXIMAX N-595 Service Manual

N-595
Intra-hospital transport includes transport of a patient within the
hospital or hospital-type facility.
Home Care use is defined as managed/used by a lay person (parent or
other similar non-critical caregiver) in the home environment.
Use with any particular patient requires the selection of an
appropriate oxygen transducer as described in this Operator's Manual.
Motion performance claims are applicable to models
MAX-A, MAX-AL, MAX-P, MAX-N, and MAX-I Nellcor
O M TM oximetry sensors.
XI AX
Through the use of the four softkeys, the operator can access trend
information, select an alarm limit to be changed, choose the language to be
used, adjust the internal time clock, and change communications protocol.
The N-595 can operate on AC power or on an internal battery. The controls
and indicators for the N-595 are illustrated and identified in Figure 1 on
page 3 and Figure 2 on page 4.
1. SpO Sensor Port
2
2. AC Power Indicator
3. POWER ON/OFF Button
4. Low Battery Indicator
5. Waveform Display
TM
6. SatSeconds Timer
7. %SpO Display
2
8. Pulse Rate Display
9. Alarm Silence Display
10. ALARM SILENCE Button

Figure 1: N-595 Front Panel

11. ADJUST UP Button
12. ADJUST DOWN Button
13. CONTRAST Button
14. Softkeys
15. Menu Bar
16. Trend In-Sensor Indicator
17. Motion Indicator
18. Pulse Search Indicator
19. Speaker
Introduction
3