Parker EME
4.4.9.5
Measurement of the spectral analysis
System S
Interpretation of the frequency spectrum
Frequency Spectrum comulative
Measurement of frequency spectra
In this chapter you can read about:
Functionality of the measurement....................................................................................................201
Leak effect and windowing ..............................................................................................................202
Please note that you require a licence hey (see page 196, see page 194) for
Functionality of the measurement
Controller & Signal Pocessing
Steuerung & Signal-
Verarbeitung
Signal u(t)
1
During the spectral analysis of scanned signals with the aid of the discrete Fourier
transformation, a so-called frequency resolution (Df) results, Df being =fA/N,
independently of the scanning frequency (fA) and of the number of measurement
values used (N).
The spectra of scanned signals are only defined for frequencies, which are an
integer multiple of this frequency resolution.
192-120101 N11 C3I11T11 November 2007
this application!
Upload
C3-Software-
Oscilloscope
System S
2
50mA/Div
Setting up Compax3
Amplitude spectrum
V(f)
Amplitudenspektrum
20ms
50Hz
201