Test Commissioning Compax3 - Parker Compax3S025V2 Operating Instructions Manual

Parker EME
4.2

Test commissioning Compax3

X1: Mains supply
/1: 230V AC +10%
/2: 0V
/3: PE
X3
Motor / Brake
X4: 24VDC
/3: Enable with 24VDC
Travel via JOG+ and
JOG-
Required wiring:
Operational enable of the servo controller:
Plug/Pin
X12/6 (no STOP)
X12/8 (Energize the motor)
X4/3 (Enable power output stage)
After you have configured the Compax3 according to your application with the help
of the Compax3 ServoManager, you can now carry out the first motor movements.
In the optimising window of the Compax3 ServoManager you can run the motor in
positive or negative movement direction.
192-120101 N11 C3I11T11 November 2007
X10 to PC
RS232 / RS485
X12:
(see following)
Inputs/Outputs
X13 to
Motor-Feedback
Assignment
= 24V DC (jumper to X12/1)
= 24V DC (jumper to X12/1)
= 24V DC (jumper to X4/1)
Setting up Compax3
105