Commissioning The Load Control - Parker Compax3S025V2 Operating Instructions Manual

Parker EME
4.4.6.2

Commissioning the load control

If a load control was configured,l the following buttons are displayed in the
Commissioning window :
1 Status of the load control
yellow =>off
green => on
2 Activate / Deactivate load control
3 Alignment of the position values of motor and load
(Load position = Motor position)
Only if the load control is deactivated!
Please note the explanations for the load control!
192-120101 N11 C3I11T11 November 2007
Setting up Compax3
189