Logging Console - Cisco Small Business 300 1.1 Series Administration Manual

Syslog Commands
78-20269-01 Command Line Interface Reference Guide
Command Mode
Global Configuration mode
User Guidelines
You can use multiple SYSLOG servers.
The format of an IPv6Z address is: <
•
interface-name =
/<physical-port-name> | 0
•
decimal-number> | <integer><decimal-number
integer = <
•
decimal-number = 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9
•
physical-port-name = Designated port number, for example SYSLOG16
The following combinations are possible:
•
ipv6_address%interface_id - Refers to the IPv6 address on the interface
specified.
•
ipv6_address%0 - Refers to the IPv6 address on the single interface on
which an IPv6 address is defined.
•
ipv6_address - Refers to the IPv6 address on the single interface on which
an IPv6 address is defined.
Examples
console(config)# logging host 1.1.1.121
console(config)# logging host 3000::100/SYSLOG1
18.3

logging console

Use the logging console Global Configuration mode command to limit messages
logged to the console to messages to a specific severity level. Use the no form of
this command to restore the default.
Syntax
level
logging console
no logging console
ipv6-link-local-address>%<interface-name
vlan<integer> | ch<integer> | isatap<integer> |
18
>
>
221