Clear Logging - Cisco Small Business 300 1.1 Series Administration Manual

Syslog Commands
78-20269-01 Command Line Interface Reference Guide
Default Configuration
The default severity level is informational.
The default buffer size is 200.
Command Mode
Global Configuration mode
User Guidelines
All the SYSLOG messages are logged to the internal buffer. This command limits
the messages displayed to the user.
Example
The following example shows two ways of limiting the SYSLOG message display
from an internal buffer to messages with severity level debugging. In the second
example, the buffer size is set to 100.
Console(config)# logging buffered debugging
Console(config)#
logging buffered 100 7
18.5

clear logging

Use the clear logging Privileged EXEC mode command to clear messages from
the internal logging buffer.
Syntax
clear logging
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
18
223