Exec-Timeout - Cisco Small Business 300 1.1 Series Administration Manual

Line Commands
78-20269-01 Command Line Interface Reference Guide
User Guidelines
To start communication using Autobaud, press the Enter key twice.
Example
The following example enables autobaud.
Console(config)# line console
Console(config-line)#
13.4

exec-timeout

The exec-timeout Line Configuration mode command sets the session idle time
interval, during which the system waits for user input before automatic logoff. Use
the no form of this command to restore the default configuration.
Syntax
exec-timeout minutes
no exec-timeout
Parameters
•
minutes—Specifies the number of minutes. (Range: 0-65535)
•
seconds—Specifies the number of seconds. (Range: 0-59)
Default Configuration
The default idle time interval is 10 minutes.
Command Mode
Line Configuration mode
Example
The following example sets the HTTP session idle time interval before automatic
logoff to 20 minutes and 10 seconds.
Console(config)# line console
Console(config-line)#
autobaud
[ seconds ]
20 10
exec-timeout
13
182