Table of Contents
Advertisement
Configuration and Image File Commands
78-20269-01 Command Line Interface Reference Guide
Keyword
Source or Destination
xmodem:
Source for the file from a serial connection that uses the
Xmodem protocol.
null:
Null destination for copies or files. A remote file can be copied
to null to determine its size. For instance copy running-conf null
returns the size of the running configuration file.
backup-config
Backup configuration file. A configuration file can be
downloaded to this file (without giving a file name). This can
then be copied to the running-conf or startup-conf files.
mirror-config
Mirrored configuration file. If the running config and the startup
config have been identical for 24 hours, the startup config is
automatically copied to the mirror-conf file by the system. It can
then be copied to the startup or running conf if required.
localization
This enables copying a language dictionary file to the
secondary language file, such as in copy
tftp://10.5.234.203/french.txt localization. This creates French
as the second language. the file french.txt is the French
dictionary.
logging
Specifies the SYSLOG file.
Word<1-128>
Name of file.
Command Mode
Privileged EXEC mode
User Guidelines
The location of a file system dictates the format of the source or destination URL.
The entire copying process may take several minutes and differs from protocol to
protocol and from network to network.
If the IPv6 address is a Link Local address (IPv6Z address), the outgoing interface
name must be specified. The format of an IPv6Z address is:
{
ipv6-link-local-address
•
ipv6-link-local-address—Specifies the IPv6 Link Local address.
•
interface-id—{<port-type>[ ]<port-number>}|{port-channel |
po}[]<port-channel-number> | {tunnel | tu}[ ]<tunnel-number> | vlan[ ]<vlan-id>
}%{
interface-id
}. The subparameters are:
7
116
Advertisement
Table of Contents
