Ipv6 Mld Robustness - Cisco Small Business 300 1.1 Series Administration Manual

IPv6 MLD Snooping Commands
78-20269-01 Command Line Interface Reference Guide
Default Configuration
Disabled
Command Mode
Global Configuration mode
User Guidelines
MLD snooping can only be enabled on static VLANs.
MLDv1 and MLDv2 are supported.
To activate MLD snooping, the Bridge Multicast Filtering command should be
enabled.
The user guidelines of the bridge multicast IPv6 mode interface VLAN
configuration command describe the configuration that can be written into the
FDB as a function of the FDB mode, and the MLD version that is used in the
network.
Example
console(config)# ipv6 mld snooping vlan 2
32.3

ipv6 mld robustness

Use the ipv6 mld robustness interface Configuration mode command to change a
value of the MLD robustness variable. Use the no format of the command to return
to default.
Syntax
ipv6 mld robustness
no ipv6 mld robustness
Parameters
count - The number of expected packet losses on a link. (Range: 1–7)
Default Configuration
2
count
32
452