Show Spanning-Tree - Cisco Small Business 300 1.1 Series Administration Manual

Spanning-Tree Commands
78-20269-01 Command Line Interface Reference Guide
Syntax
abort
Command Mode
MST Configuration mode
Example
The following example exits the MST Configuration mode without saving changes.
Console(config)# spanning-tree mst configuration
Console(config-mst)#

29.28 show spanning-tree

Use the show spanning-tree Privileged EXEC mode command to display the
spanning-tree configuration.
Syntax
[interface-id] [instance instance-id]
show spanning-tree
[detail] [active | blockedports] [instance instance-id]
show spanning-tree
mst-configuration
show spanning-tree
Parameters
•
instance-id
instance
•
detail—Displays detailed information.
•
active—Displays active ports only.
•
blockedports—Displays blocked ports only.
•
mst-configuration—Displays the MST configuration identifier.
•
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
Privileged EXEC mode
abort
—Specifies the spanning tree instance ID. (Range: 1–
29
16)
385