Table of Contents
Advertisement
Introduction
STEP 1
STEP 2
STEP 3
78-20269-01 Command Line Interface Reference Guide
Using Telnet over an Ethernet Interface
Telnet provides a method of connecting to the Command Line Interface over an IP
network.
To establish a telnet session from the command prompt, perform the following
steps:
Click Start, then select All Programs > Accessories > Command Prompt to open a
command prompt.
Figure 4 Start > All Programs > Accessories > Command Prompt
At the prompt, enter telnet 1<IP address of switch>, then press Enter.
Figure 5 Command Prompt
The
Command Line Interface
will be displayed.
1
25
Advertisement
Table of Contents
