Radius-Server Retransmit - Cisco Small Business 300 1.1 Series Administration Manual

Remote Authentication Dial-In User Service (RADIUS) Commands
78-20269-01 Command Line Interface Reference Guide
Parameters
key-string—Specifies the authentication and encryption key for all RADIUS
communications between the device and the RADIUS server. This key must match
the encryption used on the RADIUS daemon. (Range: 0–128 characters)
Default Configuration
The key-string is an empty string.
Command Mode
Global Configuration mode
Example
The following example defines the authentication and encryption key for all
RADIUS communications between the device and the RADIUS daemon.
Console(config)# radius-server key
16.3

radius-server retransmit

Use the radius-server retransmit Global Configuration mode command to specify
the number of times the software searches the list of RADIUS server hosts. Use
the no form of this command to restore the default configuration.
Syntax
radius-server retransmit
no radius-server retransmit
Parameters
retries
retransmit —Specifies the retransmit value. (Range: 1–10)
Default Configuration
The software searches the list of RADIUS server hosts 3 times.
Command Mode
Global Configuration mode
enterprise-server
retries
16
208