Ip Arp Proxy Disable - Cisco Small Business 300 1.1 Series Administration Manual

IP Addressing Commands
78-20269-01 Command Line Interface Reference Guide
Command Mode
Global Configuration mode
Example
The following example configures the ARP timeout to 12000 seconds.
Console(config)# arp timeout
35.8

ip arp proxy disable

Use the ip arp proxy disable Global Configuration mode command to globally
disable proxy Address Resolution Protocol (ARP). Use the no form of this
command reenable proxy ARP.
Syntax
ip arp proxy disable
no ip arp proxy disable
Parameters
N/A
Default
Enabled by default.
Command Mode
Global Configuration mode
User Guidelines
The ip arp proxy disable command overrides any proxy ARP interface
configuration. To use this command, you must put the switch into routing mode
using the set system mode router command.
Example
The following example globally disables ARP proxy when the switch is in router
mode.
12000
35
485