Table of Contents
Advertisement
IPv6 MLD Snooping Commands
78-20269-01 Command Line Interface Reference Guide
Example
console(config)# interface vlan 1
console(config-if)# ipv6 mld last-member-query-count 3
32.11 ipv6 mld last-member-query-interval
Use the ipv6 mld last-member-query-interval interface configuration command to
configure the Last Member Query Interval. Use the no format of the command to
return to default.
Syntax
ipv6 mld last-member-query-interval
no ipv6 mld last-member-query-interval
Parameter
milliseconds—Interval, in milliseconds, at which MLD group-specific host query
messages are sent on the interface. (Range: 100–64512).
Default Configuration
1000
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
You can execute the command before the VLAN is created.
Example
console(config)# interface vlan 1
console(config-if)# ipv6 mld last-member-query-interval 2000
32.12 ipv6 mld snooping vlan immediate-leave
Use the ipv6 mld snooping vlan immediate-leave Global Configuration mode
command to enable MLD Snooping Immediate-Leave processing on a VLAN. Use
milliseconds
32
459
Advertisement
Table of Contents
