How To Close The Sc Setting Tool; How To Delete The Sc Setting Tool - Furuno SC-33 Operator's Manual

5. Click the [Connect] button to connect the SATELLITE COMPASS
The [SC_Setting_Tool] dialog box appears. All setting items on the [SC_Setting_Tool] dialog box
are grayed out while connecting the SATELLITE COMPASS
lished correctly, the current settings of the SATELLITE COMPASS
For details about the [SC_Setting_Tool] dialog box and each setting item, see chapter 2.
Note: The SC setting tool may not show the setting items correctly due to the OS font size setting.
For best performance, the OS font size should be "100%". Set font size as follows:
®
• Windows 7: Click the desktop window.
®
• Windows 10: Start
items
1.4.2

How to close the SC setting tool

1. If the settings are not applied to the SATELLITE COMPASS
button on the [SC_Setting_Tool] dialog box to apply the settings.
2. Click the [Disconnect] button to disconnect from the SATELLITE COMPASS
the [Select Device] dialog box .
3. Click the close button (
1.5

How to Delete the SC setting tool

The SC setting tool does not require installation. Therefore, software uninstall procedure is not
also required. To delete the SC setting tool, delete the executable file and folder for the SC setting
tool. The folder location for the SC setting tool is shown as follows:
• For 32 bit OS: C:\Program Files\Furuno\SC_Setting_Tool
• For 64 bit OS: C:\Program Files(x86)\Furuno\SC_Setting_Tool
Note: If you created a short cut for the SC setting tool, delete the short cut file. The short cut file
is no longer used when the SC setting tool is deleted.
Personalize
Setting System Display
) to close the SC setting tool.
1. OPERATIONAL OVERVIEW
™
. When the connection is estab-
™
Display
Change the size of text, apps, and other
™
, click the [Apply] or [Apply All]
4
™
.
are shown.
Smaller
™
and go back to