Terminal Setup: [F6]; Updating A Distress Alert: [F10] - Furuno FS-1562 Manual

*Nav port
*DTE 2 Port Sub -addr.
*Message Output Port
*Polling Output Port

2.2 Terminal setup: [F6]

1.Press [F6] to display the Terminal menu.
2. Set the "DET Type" to Main.

2.3 Updating a Distress Alert: [F10]

1. Press [F10] key, and [2] key. The display should look like below. Necessary settings
are as below.
*Set the CES ID
The default CES ID is a current NCS (Factory setting is 144, AOR-ENCS).
Tap the Space Bar to display the LES ID list. Select a suitable CES by the [↓]
key followed by the [Enter] key.
*Protocol
Select "Maritime".
*Nature
Set to "Unspecified".
Auto
001
DTE1
DTE1
G1-2
FELCOM 10