Danger Targets Log; How To Set The Conditions For Logging Danger Targets - Furuno FMD-3200 Operator's Manual

18.5

Danger Targets Log

The [Danger Targets] log stores information about dangerous targets that are re-
ceived from a radar (TTs) and/or targets that are received from an AIS transponder
(AIS targets).
If a TT or AIS target is within the set CPA (Closest Point of Approach) and TCPA (Time
to CPA), information of all TTs (including non-dangerous targets) are recorded into the
danger target log. This data is as follows:
• Date: Date of entry
• Time: TIme of entry
• Source: Unit which generated log
• Type: Type of dangerous target
• Latitude and Longitude: Latitude and longitude position of dangerous target
• SPD/kn: Speed of dangerous target
• CRS/°T: Course of dangerous target
• HDG/°T: Heading of dangerous target
• CPA/NM, TCS/min: CPA and TCPA of dangerous target
• Index: Radar target no. (TT), MMSI (AIS)
How to view the danger targets log
To open the [Danger Targets] log, click the [Record], [Target Log] and [Danger Target]
buttons on the InstantAccess bar.
18.5.1

How to set the conditions for logging danger targets

The operator may set Closest Point of Approach (CPA), Time to CPA (TCPA) and Log
interval for viewing dangerous TT and AIS targets on the ECDIS display.
1. Open the menu and select the [Danger Targets] page from the [Danger Target]
menu.
2. Set how often to record dangerous TTs and AIS target with [Log interval].
18. RECORD, PLAY BACK FUNCTIONS
18-7