Connection Schedule - Leakage Flux Sensors - Roland R4000 Manual

Electrical installation
4.6 Connection schedule – Leakage flux sensors
Fig. 21: Connection schedule for Leakage Flux Sensors
Pos: 32 /Sc hweis snaht/ Geräte/ SN D40/5 E lektrisc he In stal lation/Ru ndkörper/ Ansc hlu sspla n Kombise nso ren @ 0\mo d_11 751 7448 176 5_5 01.docx @ 39 53 @ 2 @ 1
42
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Weld Seam Detection System R4000 SND40
for Tubes, Cans and Drums
*8 8
Note:
For cables delivered starting Nov. 2014 following applies:
*Contact No. 8 might be connected with the cable shield.
** A brown wire might be connected parallel together with a
blue wire. This will not affect the proper functionality of the cable,
the sensor or the control unit.
Manual
(+blue)
B0059001 / Rev. 2.3