Setting The Feed Dog Movement; Setting The Feed Eccentric - Dürkopp Adler 1767 Service Instructions Manual

9.2 Setting the feed dog movement

The feed dog moves in an elliptical cycle. To align this correctly, the feed
movement and the stroke height and the stroke movement of the feed dog
all have to be set.
Order
First, check the following setting:
• Feed dog position ( p. 41)

9.2.1 Setting the feed eccentric

Cover
• Remove the front cover ( p. 18)
Fig. 30: Setting the feed eccentric
(1) - Locking pin
(2) - Markings
44
CAUTION
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before you set the feed dog
movement.
②
①
(3) - Eccentric
(4) - Screws
Service Instructions 1767 - 00.0 - 12/2016
Feed dog
③ ④