Buttons - Dürkopp Adler 1767 Service Instructions Manual

The categories include the following enhanced machine functions:
Parameters are represented by a number from 00-99.

19.1.2 Buttons

The buttons of the control panel are divided into the following groups:
OP1000 buttons and functions
92
• Production control (such as the stitch counter)
• Needle cooling
• Light barrier
• Thread
• Programming
• Seam program
No. Button
①
Thread button group
Start bartack
Multiple start bartack
End bartack
Multiple end bartack
Thread cutter
Thread clamp
Needle position after
sewing stop
Sewing foot lift after
thread cutter
Function
• Sets the start bartack
• Sets the multiple start
bartack
• Sets the end bartack
• Sets the multiple end
bartack
• Activates or deactivates
the thread cutter
• Activates or deactivates
the thread clamp
• Sets the needle position
after sewing stop
• Activates or deactivates
the sewing foot lift after
thread cutter
Service Instructions 1767 - 00.0 - 12/2016
Programming
Reference
 p. 96
 p. 97
 p. 98
 p. 99
 p. 99
 p. 99
 p. 100
 p. 100