Setting the stitch length adjusting wheel
Fig. 25: Setting the stitch length limit
(1) - Stitch length adjusting wheel
(2) - Screw
To set the stitch length limit:
1. Position the stitch length adjusting wheel (1) to 0.
2. Hold the stitch length adjusting wheel (1) in place.
3. Loosen the screw (2).
4. Remove the stitch length adjusting wheel (1).
5. Loosen the threaded pin from one of the holes (3) or (4).
6. Screw the threaded pin into the hole for the required maximum stitch
7. Turn the scale so that the 0 is exactly next to the adjusting mark.
8. Assemble the stitch length adjusting wheel (1) and hold it in place.
9. Tighten the screw (2).
Service Instructions 1767 - 00.0 - 12/2016
①
length. The holes are marked with numbers for the stitch length.
②
③
(3) - Hole for stitch length 6
(4) - Hole for stitch length 9
④
39