Performing The Basic Settings Of The Eccentrics; Adjusting The Sewing Foot Stroke, Feed Dog Lift And Feed Dog Movement Of The Eccentric - Dürkopp Adler D869 e-con Service Instructions Manual

5
5.1
Fig. 27: Adjusting the eccentric
The looping stroke (approx. 202°) ( p. 34) securing position allows you
to define the basic settings for sewing foot stroke, feed dog lift and feed
dog movement.
38

Performing the basic settings of the eccentrics

WARNING
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before you adjust the
eccentric.
NOTICE
Property damage may occur!
Improperly tightened screws can result in damage to the machine.
Always tighten both screws on the flats.
Adjusting the sewing foot stroke, feed dog lift and feed
dog movement of the eccentric
Sewing foot stroke
Feed dog lift
Performing the basic settings of the eccentrics
Feed dog movement
Service Instructions D869 e-con - 00.0 - 09/2023