Performing The Basic Settings Of The Eccentrics; Adjusting The Sewing Foot Stroke, Feed Dog Lift And Feed Dog Movement Of The Eccentrics - Dürkopp Adler D867 e-con Service Instructions Manual

5
5.1 Adjusting the sewing foot stroke, feed dog lift and feed
Fig. 24: Adjusting the eccentrics - overview of eccentric positions
The looping stroke securing position (at approx. 202°) allows you to define
the basic settings for the sewing foot stroke, the feed dog lift and
the`feed dog movement.
Proper setting
The markings on each eccentric are positioned correctly relative to one
another.
36

Performing the basic settings of the eccentrics

WARNING
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before you adjust the
eccentric.
NOTICE
Property damage may occur!
Improperly tightened screws can result in damage to the machine.
Always tighten both screws on the flats.
dog movement of the eccentrics
Sewing foot stroke
Feed dog lift
Performing the basic settings of the eccentrics
Service Instructions D867 e-con - 00.0 - 08/2023
Feed dog movement