Disassembling And Assembling The Throat Plate - Dürkopp Adler 1767 Service Instructions Manual

3.3.9 Disassembling and assembling the throat plate

Fig. 9: Disassembling and assembling the throat plate
(1) - Screws
(2) - Throat plate
Disassembling the throat plate
To disassemble the throat plate:
1. Open the throat plate slide ( p. 21).
2. Loosen both screws (1).
3. Remove the throat plate (2).
Assembling the throat plate
To assemble the throat plate:
1. Insert the throat plate (2).
2. Tighten both screws (1).
3. Close the throat plate slide ( p. 21).
22
CAUTION
Risk of injury from sharp and moving parts!
Puncture or crushing possible.
Switch off the machine before you disassemble or
assemble the throat plate.
①
②
Ensure that the nose (3) of the bobbin case (4) is in the cutout of the
throat plate.
(3) - Nose
(4) - Bobbin case
Service Instructions 1767 - 00.0 - 12/2016
Working basis
④
③