Table of Contents
Advertisement
Important
If the number of repetitions = 0, the program will continue working until
stopped by the pedal.
7. Confirm your selection with
19.2.4 Setting the end bartack
The end bartack secures the seam at the seam end. If a seam consists of
backward stitches only, one speaks of single bartacks. A seam of forward
and backward stitches is called a double bartack.
Single bartack
To set the single bartack:
1. Press
The upper left LED illuminates.
2. Press the C+ button from the Programming button group repeatedly
You can begin sewing; press the pedal forward to pedal position +1.
At the end of the seam, press the pedal back to pedal position -2.
Double bartack
To set the double bartack:
1. Press
Both LEDs illuminate.
2. Press the C+ button from the Programming button group repeatedly
3. Press the D+ button repeatedly until the required number of backward
You can begin sewing; press the pedal forward to pedal position +1.
At the end of the seam, press the pedal back to pedal position -2.
To deactivate the end bartack press
98
.
until the required number of forward stitches is reached.
twice.
until the required number of forward stitches is reached.
stitches is reached.
.
.
Service Instructions 1767 - 00.0 - 12/2016
Programming
Advertisement
Table of Contents
