Table of Contents
Advertisement
Proper setting
1. Position the adjusting wheel for the sewing foot stroke 9 and the stitch
The feeding foot (1) touches down exactly on the feed dog (2)
Fig. 48: Checking the stroke movement for the feeding foot
(1) - Feeding foot
(2) - Feed dog
Setting the eccentric
Cover
• Remove the front cover ( p. 18)
Fig. 49: Setting the stroke movement for the feeding foot
(1) - Screw
(2) - Eccentric
64
length adjusting wheel to 0.
when the downward movement of the needle tip (3) reaches the
upper edge of the feeding foot. This will occur when the handwheel
is in the 95° position.
①
②
(3) - Needle tip
④
③
(3) - Marking
(4) - Marking
Service Instructions 1767 - 00.0 - 12/2016
Sewing feet
Advertisement
Table of Contents
