Table of Contents
Advertisement
Setting the winder run and automatic stop
Fig. 56: Setting the winder run and automatic stop
(5) - Block
(6) - Winder wheel
(7) - Threaded pin
To set the winder run and the automatic stop:
12. Loosen the threaded pin (8).
13. Set the switch cam (9) such that it is just contacting the leaf spring (10)
14. Set the switch cam (9) such that the winder lever (3) has no axial play.
15. Tighten the threaded pin (8).
Assembling the winder
Fig. 57: Assembling the winder
(1) - Screws
To assemble the winder:
16. Place the winder on the machine arm.
17. Tighten the screws (1).
72
when the block (5) has engaged in the locking disk.
(8) - Threaded pin
(9) - Switch cam
(10) - Leaf spring
(2) - Marking for XXL hook
Service Instructions 1767 - 00.0 - 12/2016
Winder
Advertisement
Table of Contents
