In addition to A, there are 2 other bobbin stitch counters.
Use parameter 02 and 03, respectively, to set the reset value for bobbin
stitch counter B and C.
Reset the bobbin stitch counter with the
Activating the bobbin stitch counter
To activate the bobbin stitch counter:
1. Press
Parameter mode is started.
2. Press the B+ button of the Programming button group repeatedly until
3. Press
The LED of the
4. Press the D+ button.
1 appears on the display.
5. Confirm your selection with
The bobbin stitch counter is activated.
6. Exit parameter mode with
To deactivate the bobbin stitch counter again, in category 06 change
parameter 00 to 0.
104
.
06 appears on the display:
If parameter 00 does not appear:
Press the D+ button repeatedly until the parameter appears on the
display.
.
button.
button flashes. 0 appears on the display.
.
.
Service Instructions 1767 - 00.0 - 12/2016
Programming