Removing And Placing The Rear Cover - Dürkopp Adler 1767 Service Instructions Manual

Working basis

3.3.4 Removing and placing the rear cover

Fig. 4: Removing and placing the rear cover
(1) - Screws
Removing the rear cover
To remove the rear cover:
1. Loosen the screws (1).
2. Remove the rear cover (2).
Placing the rear cover
To place the rear cover:
1. Place the rear cover (2).
2. Tighten the screws (1).
Important
When placing the cover, make sure not to pinch any cables.
Service Instructions 1767 - 00.0 - 12/2016
②
①
(2) - Rear cover
17