Maintenance - Dürkopp Adler 1767 Service Instructions Manual

Maintenance

20 Maintenance
This chapter describes maintenance work that needs to be carried out on
a regular basis to extend the service life of the machine and achieve the
desired seam quality.
Maintenance interval
Work to be carried out
Machine head
Remove fluff, lint and thread remnants
Clean the motor fan mesh
Check the oil level
Lubricating the gear
Pneumatic system
Check the water level in the pressure controller
Check the filter element in the maintenance unit
Check the tightness of the system
Service Instructions 1767 - 00.0 - 12/2016
WARNING
Risk of injury from sharp parts!
Punctures and cutting possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
WARNING
Risk of injury from moving parts!
Crushing possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
Operating hours
8 40 160 500






1000

105